Download Click

Tp Link Tl Wa830Re Driver Download

In this post you can find tp link tl wa830re driver download.

Driver Info:

Driver version: 2.4.2
File size: 4.2 MB
OS: Windows 7, Win Vista, Windows 8, Win XP

File is safe, uploaded from tested source.

Available link for download

TP Link Recovery Mode for WR1043ND

Did I ever mentioned that my overclocked bootloader has TP-Links new built in tftp recovery mechanism?
Do know know if you ever flashed my overclocked bootloader successfully and later "brick" it by flashing new OpenWRT images wrongly there is a 100% chance of recovery?

Simply said I created the overclocked firmware mods by detecting the bit responsible for flipping up the PLL, modifying the bit and correcting the checksum so the new TP-Link uboot tftp recovery mechanism still works.

In fact I use it to test all the firmware I built ALL THE TIME because I am simply too lazy to open up the router and connect the serial pins.

So how do you do it?

1. Turn off all firewall
2. Get a tftp server software, in Windows I use tftpd32 in Linux I use dnsmasq
3. Copy a factory firmware (without the uboot) into the tftp directory change the filename to wr1043nv1_tp_recovery.bin
4. To activate the recovery mode hold the reset button immediately when it powers on before it boots into linux, you will flashing lights.
5. This emergency mode listens for the IP Address 192.168.0.66 so you can set 192.168.0.66 static ip mode on your PC running the tftp software
6. After that if the router detects the tftp server it will attempt to grab to grab the file wr1043nv1_tp_recovery.bin from the tftp server at 192.168.0.66
7. Then it will begin flashing itself you just need to grab a cup of coffee while it reboots after flashing

In fact all new TP-Link firmware with bootloaders now come with recovery modes listening at different address. You can refer to this useful forum thread by a uboot expert pepe2k.

Available link for download

TP Link WDR4900v1 OpenWRT Technical Review

As you can see from my github I am adding support to a new Router.
The TP-Link WDR4900v1.
The reason why I am supporting it is because I got 1 recently.

As you know this is a relatively old Wireless N Dual Band Router compared with all the spanking new Wireless AC Router, I saw that it was on cheap sale, $90 SGD compared to the original retail price of $190 and so I purchased it.

That was not all the reason I purchase it. The main reason was it came with a esoteric Processor: the Freescale e500v2 P1014 SoC.

It is a POWER Architecture by Freescale, Clocking up to 800MHZ.
It is a relatively high power Router with SPE register modes but from the Kernel Source it cannot boot if you enable SPE or Hardfloat on the Kernel however you can enable it in the userland applications.
Probably a GCC thing.

As usual this is not your Stock Firmware review, it is a "OpenWRT firmware on it" review so if you are looking for nice numbers on stock firmware you should look at the millions of reviews posted somewhere else.

I took a look at the default buildroot in OpenWrt for this firmware, there are a number of optimizations that can be applied but is not.

So I added my patches and the github repo can be found here.

A number of significant patches I added that boosted performance are the
CFLAGS, TX and RX buffer on the gianfar driver, and the Assembler Optimizations for OpenSSL similar to what has been done for MIPS Architecture, I will only upload the binaries next month but if you are impatient you can build it yourself from my github repo.

So below are some of the findings of OpenWrt on WDR4900v1after using my Optimized Build which I will only upload next month with the rest of my releases.

NAT Performance LAN to WAN


It is roughly 550Mbps, only slightly higher than a optimized Overclock WDR4300@730MHZ.
So if we were to consider Throughput per MHZ it would be slightly less efficient than a MIPS74kc.

As for Wireless @ 2.4GHZ Close range it maxes out at > 150Mbps peak burst using WPA2-PSK AES Encryption.
This is a very good result, probably due to its superior AES computation capabilities


2.4GHZ is very often the lower bar performance due to the channel congestion so we can assume that 5GHZ will be slightly high in throughput compared to 2.4GHZ

Next findings are very interesting. Although it uses similar Wireless Radios compared to WDR4300 it is way way higher Power.

Compared to the WR1043ND which can do 24dbm at 2.4GHZ, this Router can do 25dbm! (WDR4300 does a maximum of 22dbm at 2.4GHZ) but remember the 2.4GHZ antenna is INTERNAL therefore you cannot compare it to the EXTERNAL antenna of the WR1043NDv1


Lastly its 5GHZ capabilities is also clearly superior compared to its weaker brother WDR4300.


It can do a flat 22dbm on ALL 5GHZ Frequency compared to WDR4300 which can only do maximum of 20dbm on higher frequency range on 5GHZ and 15dbm on the lower frequency range on 5GHZ.

In conclusion, basically it is slightly faster than WDR4300 and can transmit higher power than WDR4300 and WR1043NDv1.

Stay tune for the Feburary Release!

Available link for download