Saturday, October 22, 2016
Troubleshoot 1440x900 Resolution will not change
Troubleshoot 1440x900 Resolution will not change
1440x900 Resolution will not change
My problem is the resolution.
I know that I can change the resolution above 1440x900 to 1600x1200 but it just wont work anymore.
Yesterday, the scrollbar thing was able to go up above 1440x900 but today it doesnt show anymore.
Ive tried reinstalling the
drivers for ATI Mobility Radeon X1400 (Laptop) but it just gives an error that it doesnt find anything to install or something like that (which wasnt the case before)
ÿ
I know Im not crazy because it says with a warning icon under the resolution dropbox
*If your resolution is below 1600 x 1200, some items may not fit on the screen.*
Anwsers to the Problem 1440x900 Resolution will not change
Download SmartPCFixer to Fix It (Free)
Hi Searcher646464,
If possible do provide the exact error message you get while reinstalling the drivers.
You may try using the below steps and check if these help -
Method 1:
You can try performing the system restore after booting the computer.The System Restore tool uses restore points to return system files and settings to an earlier point in time.
You can use it to restore the
operating system to a point in time in which you did not experience the issue.
Note: When you use System restore to restore the computer to a previous state, programs and updates that you installed are removed.
You may open System Restore by clicking theÿStart button.
In the search box, typeÿSystem Restore,
and then, in the list of results, clickSystem Restore.?ÿIf youre prompted for an administrator password or confirmation, type the password
or provide confirmation.
To do this, there must be a System Restore point at which the logon was successful.
You may refer to the below links for assistance on performing a system restore -
http://windows.microsoft.com/en-us/windows7/What-is-System-Restore
http://windows.microsoft.com/en-US/windows7/System-Restore-frequently-asked-questions
Method 2:
You may check if you can provide us with the error message for the devices from device manager.
You may refer to the below steps-ÿ
a.
Open Device Manager by clicking the Start button, clicking Control Panel, clicking System and Maintenance, and then clicking Device Manager.
If you are prompted for an administrator password or confirmation, type the password
or provide confirmation.
b.
In Device Manager, locate the device and then right-click the device name and go to properties.
c.
Now under the general tab check the device status.
Let us know the status of the device.
Also you may inform any error code stated with the status.
Method 3:
a.
Also you can use the link ?windowsupdate.microsoft.com/catalog?.
b.
Check for "ati x1400 windows 7.
c.
Then install the appropriate drivers and check if the issue resolves.ÿ
Hope this helps.
Thanks,
Meghmala ? Microsoft Support
Visit ourÿMicrosoft Answers Feedback Forum and let us know what you think
Make Sure that your Computer Meets the System Requirements
Microsoft Windows Requirements :
- 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
- 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
- 16 GB available hard disk space (32-bit) or 20 GB (64-bit)
This error can be due to some configuration requirements for you system. If your computer hardware is not up to par, then make sure you update where necessary before continuing.
Another Safe way to Repair the Problem: 1440x900 Resolution will not change:
How to Fix 1440x900 Resolution will not change with SmartPCFixer?
1. Click the button to download SmartPCFixer . Install it on your system. Run it, and it will scan your computer. The errors will be shown in the scan result.
2. After the scan is finished, you can see the errors and problems need to be fixed. Click Fix All.
3. When the Fixing part is finished, your computer has been speeded up and the errors have been fixed
Related: 1327 Invalid Drive Z Error Code 80004004 Error Code 137 80072ee7 Fix 3315 Error 26 3213 1726 0X6be Error Code 1393 Acaptuser32 dll Error 3050 Biosinfo dll,Fast Solution to Fix Error 1017 Received Logging On To The Standby Error,Installation Error 1706 Error Fixer,Loopback Failure Error - How to Fix,How to Fix Pro Registry Cleaner Error,How to Fix Win 7 Installation Error Code: 0x800705070 Error Quickly
Read More: Troubleshooter of Error: 2010 office word print only one page,[Solution] 2 week old computer with Windows 7 cant play videos any more-In a pop up it recommends to install Adobe Flash Player Installer...,[Anwsered] 2003 vs. 2007 Color Conversion,2 warnings Load Library
Available link for download
