Download Click

Troubleshoot A picture set to centered to line does not actually center to the line Error

A picture set to "centered to line" does not actually center to the line

See the attached image...the picture is anchored to the line, and vertically set to "centered" to line"...

the red line shows an extension of the center of the picture, which extends to a position between the anchored line and the line above
The blue line shows what is expected to be the "center of the line" and where the center of the picture would be aligned to.

I know i can use the absolute position and make an adjustment, but if i change the image size, it would stay centered, and i need to re-figure out the offset

Keys to the Problem A picture set to "centered to line" does not actually center to the line

Download SmartPCFixer for Free Now

Dont Download Malware

Where are you getting the download?

There are malicious people who download valid copies of a popular download, modify the file with malicious software, and then upload the file with the same name. Make sure you are downloading from the developers web page or a reputable company.

Cancel or deny any automatic download

Some sites may automatically try start a download or give the appearance that something needs to be installed or updated before the site or video can be seen. Never accept or install anything from any site unless you know what is downloading.

Avoid advertisements on download pages

To help make money and pay for the bandwidth costs of supplying free the software, the final download page may have ads. Watch out for anything that looks like advertisements on the download page. Many advertisers try to trick viewers into clicking an ad with phrases like "Download Now", "Start Download", or "Continue" and that ad may open a separate download.

Another Safe way to Repair the Problem: A picture set to "centered to line" does not actually center to the line:

How to Fix A picture set to "centered to line" does not actually center to the line with SmartPCFixer?

1. Click the button to download SmartPCFixer . Install it on your system.  Open it, and it will scan your computer. The junk files will be shown in the scan result.

2. After the scan is finished, you can see the errors and problems need to be repaired. Click Fix All.

3. When the Fixing part is finished, your computer has been speeded up and the errors have been removed

Available link for download

The BIOS does not detect or recognize the ATA SATA hard drive

If you cannot determine whether the drive is spinning: , Boot the computer and listen if it is, Try to shutdown the computer, Disconnect the power cord from behind your computer, Disconnect the power cable from the hard drive, Reconnect the power cord to the back of your computer ,Power on the computer, to see if the drive sound was audible before & then repeat, but only reconnect the hard drive and listen for it sound, Switch power cables with a device like Optical drive, so that you are using a functional power cable.

Screen shot showing  System Setup section for disk drives:

Images of Serial ATA cables. 

Blue connector - always connects to the motherboard.Grey (middle) connector - is used for slave devices on the cable.Black connector - is used for master device connection.

First, I dont expect you need to update your BIOS. A lot of people recommend "update your BIOS" whenever the mobo has trouble working with a "large" HDD because that WAS an issue for drives over 128 GB on IDE ports a while back. It has NEVER been an issue for SATA drives.
However, I do recognize that there sometimes are odd problems that can be fixed by BIOS update. If you need or want to do that without an OS installed, your manual (per the reference above from rolli59) shows you how under Section 2.1.2 on p. 2-2. It assumes you will download the latest BIOS file and place it on a USB thumb drive. Then you use a BIOS updating utility already built into your existing BIOS, following the manuals instructions.
Your manual deals with drive configuration in Sections 2.3.3 and 2.3.4 on pp 2-7 and 2-8. It does not indicate that there is any option to Enable or Disable drives, so well assume they are all Enabled. The Main screen of BIOS Setup shows the drives: if your drives are not detected and shown on this screen, you do have a problem. If you know your drives are good but all your SATA devices are Not Detected on this screen, then Id suggest you have a bad mobo.
On the other hand, Im not clear from your post that you are looking at this screen when you say, "BIOS not detecting SATA drives". If this screen does show your SATA units properly, then the BIOS HAS detected them, and you have a different problem, probably in configuration. In Section 2.3.4 you set the SATA Enhanced Mode. IF you are using Win XP in any version, you should set this to P-ATA. But assuming youre using Win7 or Vista, set this to S-ATA to get best use of your drives.
If your CD is the ONLY device on the IDE port, its jumper MUST be set to Master, and it should be plugged into the END connector on the ribbon cable. I would assume that is how it was on the old mobo, but check it.
Are you re-using your drives from before the mobo change? I would assume you are. It sounds like you are trying to Install your OS on one of them, which is a good idea. You probably cannot simply hook up your drives and expect the new mobo to boot from that - at least, not without some work to fix driver problems.
Assuming you are trying to Install to a previously-used HDD, the Install Process may tell you it cannot find any empty drive to Install to. That is NOT because the BIOS is failing to detect. It is because the drives are all "full" - that is, their entire space is assigned to existing Partitions. To do the Install of the OS, you need either to use its tools to Delete all existing Partitions on the ONE HDD youre installing to, or at least to tell it to use one specific Partition (large enough for the job) to Install to. IF you Install to any existing Partition, be aware it will wipe that entire Partition clean and you will lose all its old data.

Durable Greenhouses made from Polycarbonate UV Protected material and Aluminum

ALSO PLEASE VISIT THIS VIDEOS AND SEE IF YOU FIND SOMETHING NEED:

Windows Registry Tools can be downloaded here: 

How to kip your PC Private by deleting DATA Permanently 

http://askpctech.blogspot.com/2016/03/kip-your-pc-privat.html

This tutorial is made up on request several  users, is well is fallowing video:

1)How to Delete Paint Recent Pictures from List in Windows 7 

2)Win 7? Fix for ?Safely Remove Hardware and Eject Media? not working How To

3)Windows 10 How to Fix Black Screen After Booting

4)How To Remove Windows 10 Upgrade Notification On Windows 7 And Windows 8

5)How to Delete Face book Page Permanently - 2015

6)How to Uninstall Windows 10 and Downgrade to Windows 7 or 8.1

7)detected: not-a-virus:remoteadmin.win32

8)How to change pictures into icons for folders

9)Speed up your PC Disable System Restore on SSD

10)Speed up your PC Disable Scheduled De-fragmentation SSD

11)2015 Black screen of DEATH Windows 7 & 8 - with cursor at start-up SOLVED

12)Upon start up only wallpaper shows FIX

13)Here is video on Windows 7 & 8 - Black screen with cursor at start-up FIX 

You can also open Task Manager by pressing Ctrl+Shift+Esc.

14) I bought a windows 7 PC but it Look alike old PC FIX:

15) Windows 7 & 8 - Black screen with cursor at start-up FIX:

16) How To Fix Minecraft OpenGL Error Windows 7 xp vista 720p :

17) removing bars using regscanner regedit & file shredder 720p:

18) How to Recover windows Explorer from error 2014 720p

19) HOW TO Save on battery online 

20) Windows 7 & 8 - Black screen with cursor at start-up FIX 

Upon start up only wallpaper shows no icons

CTL+ALT+DEL then click file and new task. then type explorer.exe and press ok

Best Greenhouse system 2015 

Available link for download